NEO Ion 3715Z User Manual

Contents

NEO Ion 3715Z User Manual Manual pdf 11 page image

P. 11- Neo ION 3715ZEnglish version5. DMX CONNECTION AND DMX PROTOCOLThe device is controlled by universal DMX 512protocol, DMX address is the start channel usedto receive instructions from the external control-ler. For independent control, each fixture mustbe assigned its unique address control channels.For example, this device has four channel modes:19/41/170/19/21, if we set the mode at standard 19channels mode, and there are several models needto be independently controlled, we just simplyaddress first fixture at 1, and second fixture at 20,third one at 39, etc.If the devices have the same address, they willbehave synchronically. DMX addressing is limited,don’t set the address so high that without enoughcontrol channels for the fixtures. Display is flashingwhen no DMX signal is received.This device is equipped with 3-pins DMX in andout sockets only.Pin 1 = GND | Pin 2 = Signal (-) | Pin 3 = Signal (+) |Pin 4 = N.A. | Pin 5 = N.A.The termination is prepared by soldering a 120Ωresistor between pins 2 and 3.DMX addressingConnection: use DMX cable with 5 pin XLR-plugsto connect the controller with the fixture or onefixture with another.