Modules & OptionsPC Camera 7 - 57PC Camera Driver Installation1. Press the Fn + F10 key combination to power on the PC Camera module(click Cancel if you see a “New Hardware Found” message).2. Make sure the module is powered on, and then insert the Device Drivers &Utilities + User’s Manual CD-ROM into the CD/DVD drive.3. Click Install WinXP Drivers (button).4. Click 10.Install CCD Driver > Yes from the Drivers Installer menu.5. Choose the language you prefer and click OK.6. Click Next > Finish to restart the computer.7. Run the BisonCap application program from the BisonCam shortcut on thedesktop, or from the BisonCam item in the Start > Programs/All Pro-grams menu (if the hardware is turned off use the Fn + F10 key combina-tion to turn it on again).
