NEO NEXUS SWITCH 24 User Manual
                  | |
P. 6Neo Nexus Switch 24 -English versionRename DeviceEnter into the main menu by press MENU, then press-ing the UP and DOWN to choose the Rename Deviceoption and then press the ENTER to confirm your se -lection. Now you can rename the device by pressingUP and DOWN now. Confirm you change and moveto next option by press the MENU.Set IP AddressEnter into the main menu by press MENU, thenpressing the UP and DOWN to choose the Set IPAddress option and then press the ENTER to con-firm your selection. Now you can set IP address bypressing UP and DOWN now. Confirm you changeby press the ENTER.Please note: Each of the IP address should beunique.Set Net maskEnter into the main menu by press MENU, thenpressing the UP and DOWN to choose the SetNetmask option and then press the ENTER to con-firm your selection. Now you can set Netmask bypressing UP and DOWN now. Confirm you changeby press the ENTER.Set DMX portEnter into the main menu by press MENU, thenpressing the UP and DOWN to choose the Set DMXport option and then press the ENTER to confirmyour selection. Then you can set the parameter ofthe each port by pressing UP /DOWN and ENTERnow.1-24 DMX output You can enter to any of the DMXport 1-24 and set as below:1. Disp Type, adjust the display mode2. Port Status, DMX port status can be set as IN /OUT/ DIS;3. DMX Mode, As the DMX port set as Input sta-tus, then the Mode only can be set as normalor backup; As the DMX port set as output |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine