NHT M-00 Owner's Manual
Also see for M-00: Owner's manualOwner's manual
    | |
Contents | 
CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENWARNING: SHOCK HAZARD-DO NOT OPEN.AVIS: RISQUE DU CHOC ELECTRONIQUE-NE PAS OUVRIR.Safety Instructions -- Please Read FirstDETAILED SAFETY INSTRUCTIONS:All the safety and operation instructions should be read before the appliance is operated.Retain Instructions:The safety and operating instructions should be retained for future reference.Heed Warnings:All warnings on the appliance and in the operating instructions should be adhered to.Follow Instructions:All operation and user instructions should be followed.Water and Moisture:The appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink. laundry tub, in a wetbasement, or near a swimming pool etc.).Ventilation:The appliance should be situated so that its location or position does not interfere with its proper ventilation.For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block theventilation openings, or placed in a built-in installation, such as a bookcase or cabinet that may impede the flowof air through the ventilation openings.Heat:The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or otherappliances (including other amplifiers) that produce heat.Power Source:The appliance should only be connected to a power supply of the type described in the operating instructions oras marked on the appliance.Grounding and Polarization:Precautions should be taken so that the grounding or the polarization means of the appliance is not defeated.Power Cord Protection:Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed uponor against them, paying particular attention to cords and plugs, convenience receptacles and the point where theyexit from the appliance.Cleaning:The appliance should only be cleaned as recommended by the manufacturer.Nonuse Periods:The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.Object and Liquid Entry:Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.Damage Requiring Service:The appliance should be serviced by qualified service personnel when;The power supply cord or the plug has been damaged; orObjects have fallen, or liquid has been spilled into the appliance; orThe appliance has been exposed to rain; orThe appliance does not appear to operate normally or exhibits a change in p e r f o r m a n c e o r ,The appliance has been dropped, or the enclosure damaged.Servicing:The user should not attempt to service the appliance beyond what is described in the Operating Instructions. Allother servicing should be referred to qualified service personnel.This symbol wherever it appears, alerts you tothe presence of un-insulated dangerous voltageinside the enclosure that may be sufficient toconstitute a risk of electric shock.This symbol, wherever it appears alerts you toimportant operating and maintenanceinstructions in the accompanying literature.Read the manual.CAUTION: To reduce the risk of electrical shock, do not remove the cover.Nouserserviceablepartsareinside;referforservicingtoqualifiedpersonnel.WARNING: To reduce risk of fire or electric shock do not expose thisappliancetorainor moisture.NEED HELP?SPECIFICATIONS:Technical Support can be reached several ways:Telephone toll free: 800-NHT-9993 (648-9993),Email us at: tech@nhtpro.com,Fax us at: 707-747-1252Write us at: NHTPro6400 Goodyear Rd.Benicia, CA 94510.Type: Integrated, self-powered near/midfield monitor.Configuration: 2-way acoustic suspension.Woofer: 4.5" treated paper.Tweeter: 1" soft fabric dome.Magnetic Shielding: Full.Amplifier Power: 75W (continuous rms), 150W (100ms peak).Peak Acoustical Power: 111dB SPL (100 ms pink noise @ 1M).Residual hum/noise: <20dB SPL (A weighted @1M)THD @ 90dB SPL: <1.0% (100Hz ~10kHz @ 1M)Response +/2dB (1/3 oct. swept noise): 98Hz ~ 20kHz@1M, 93Hz ~20kHz@2M.6dB LF Cutoff: 80Hz (in-room response).Monitor Dimensions/Wgt: 9"h x 5.7"w x 7.3"d/14lbs.Monitor Enclosure Materials: Cast Aluminum/Zinc alloy body, Glass-filled ABSbaffle.Input Connectors: XLR, TRS, Phono.Controls:Input Sensitivity: 10dB, +4dB.Listening Position: near-field/mid-field.Auto Power: On, Off.Master Power: On, Off.Features/Controls |
Related manuals for NHT M-00
manualsdatabase
Your AI-powered manual search engine