NIEUWKOOP RQflex plus 10 Manual
                                  | |
Contents
| 
Displaying stored dataHow?1. Switch on the instrument by pressing the ON/OFF button.2. Press the TEST button until the pointer indicates the desired method.The three-digit reference code is shown.3. Press the MEM button. The last stored result of the method in questionis shown. If no data are stored, a beeper sounds. The display still shows thereference number.4. Repeated pressing of the MEM button displays the stored data in reversetime and date order (A).The display of the reference code in conjunction with the sound of thebeeper indicates that no further data are stored (B).5. To select stored data of another method press the TEST button to set thepointer. Then press the MEM key to display the data.6. To finish the operation press the ON/OFF (or the TEST) button.Transferring datato a PCWhen?For quality assurance and/or docu-mentation of measurement results.How?The instrument is connected toyour computer via a special inter-face. For this you need a specialsoftware program – RQdata – thatprovides you with the necessaryinstructions.| 25F:50352 CODES TA R TM E MO N / O F FT E S T12:55 12.07123 M E MS TA R TM E MO N / O F FT E S T10:23 12.0787 M E MS TA R TM E MO N / O F FT E S TF:50352 C O D ES TA R TM E MO N / O F FT E S TF:50702 C O D ES TA R TM E MO N / O F FT E S T234A4B51 2 3 4 5 1 2 3 4 5 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine