NIMO ECO Dryer 2.0 HP Installation And User Manual

Also see for ECO Dryer 2.0 HP: Service manual

Contents

NIMO ECO Dryer 2.0 HP Installation And User Manual Manual pdf 11 page image

11INSTALLATIONThe cabinet is supplied from the factorywith the door hung on the right. Thedoor can be changed to being hung onthe left.If this is required, contactthe manufacturer or themanufacturer’s serviceagent.REVERSING THE DOOR SWING OPENINGPLACEMENT/ATTACHMENTLEVELLINGThe drying cabinet should stand levelon a flat surface, resting on all four feet.Use an Allen wrench and correct theposition of all four adjustable feet fromthe outside.ATTACHMENT TO WALLThe cabinet must be attached to a wallto prevent tipping over.The assembly kit contains two anglebrackets mounted on the top of thedrying cabinet as illustrated. The bracketshave slots for adaptation to the wall.Secure the cabinet to the wall. Screwsfor fixing, washers and plastic plugs areprovided in the assembly kit.WARNING The drying cabinet shouldnot be used without being screwed to awall due to the risk of tipping forwards.AttachmentbracketTop of the dryingcabinetThe drying cabinet is only designed foroperation indoors in a dry environment.The drying cabinet should not be installedin a location where high pressure water isused for cleaning.