NIVELCO AnaCONT LE-100 Installation And Programming Manual

NIVELCO AnaCONT LE-100 Installation And Programming Manual Manual pdf 47 page image

BKI 11 ATEX 0012 X le00100a0600p_05 47 / 606.4.4. Digital output6.4.4.1 HART polling addressParameter: P19Menu path: OUTPUT SETUP / SERIAL OUTPUT / ADDRESS Default value:0Description: HART polling address (only HART capable types)The polling address can be set between 0 and 15. For a single instrument the pollingaddress is 0 and the output is 4...20mA (analogue output). If multiple units are used inHART Multidrop mode (max. 15pcs) the polling addresses should differ from 0 (1-15), inthis case the output current will be fixed at 4mA. The fixed 4mA output can be overwrittenas described in chapter 6.4.2.5.6.4.5. Service functions6.4.5.1 Security codesUser security codeParameter: -Menu path: SERVICE / SECURITY / USER LOCK Default value:0Description: Setting or unlocking the user security code.The instrument can be protected against unauthorized programming with a 4 digit PIN(Personal Identification Number) code. If either of the digits differs from 0 the code isactive. If zero is specified, then the secret code has been deleted!In case of Active code, this code is requested at menu entry.Service codeParameter: -Menu path: SERVICE / SECURITY / SERVICE LOCKDescription: Setting of the service code (only for trained personnel)!