NIVELCO MultiCONT User And Programming Manual
                                                                                                         | |
prw2101a0600p_01 40 / 1055.4.2. EXT detect:For detection of, external expansion (Relays, Current Output, or Combined) modules if available.The query process is similar to that of the DEV detect mode, the only difference being that the modules that get into the list remain in an inactive state.(See 5.2.3 Putting the MultiCONT into operation)The detected relays or current outputs (4-20 mA) will placed at end of the Detected EXT list.5.4.3. Main Display:The main display consists of 3 parts: „Main display”, „List display” and „Status field” See 5.10 .Among these, the „Main display” and „List display” can be freely selected for each device.The quantity to be displayed and the rounding of the decimal part can be set in the „Main display”.This is where to configure the stepping of the results of the transmitters on the display.n: S 300E -11 MFLOWA 06:412006.04.115 486. mCode of the device erroror "Locked" message ifprogram protecting switch is onNo. of error logsAcknowledge, (delete)withSV: 0.852 mLEV: 0,514 mTOT1: 1542 m3TOT2: 1.25 E7 m3Main displayList displayStatusfieldErr11Errors: 4PVl/s(no errors)(max 4 rows)A = absolute timeR = relative time2Statusfield(on error)Actual date& time |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine