NN STINGER CS58 Owner's Manual
                    | |
www.nationalnail.comWARNINGSAIR SUPPLY AND CONNECTIONS• Use only clean, regulated compressed air as a power source for this tool. Do not use bottlegases, combustible gases or oxygen as a power source for the tool as the tool may explode.• Do not use air supply pressures that exceed 105 PSI.• Do not exceed the recommended maximum operating air pressure as tool wear will be greatlyincreased. The air supply must be capable of maintaining the operating air pressure of the tool.Pressure drops in the air supply can reduce the tool’s driving power.• Use a pressure regulator and gauge to allow visual inspection of the air pressure beingdelivered to the tool.• Use air hoses that have rated pressures of up to 150% of the maximum pressure that can begenerated by the power source. The supply hose should contain fittings that will provide quickdisconnecting from the male plug on the tool.• Use quick connect fittings that allow the tool to be unhooked from the air supply quickly andeasily.• Do not use fittings that will not allow the tool to exhaust when the air supply is disconnected.3 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine