NORDIC AUDIO GIDA User Manual
         | |
ConnectionConnect the two GIDA-speakers with the included cable, and then plug in the power cable to mains. Connect an audiosource to any of the three external inputs. Permanent connection of sources, including CD/BD/DVD players,television/satellite/cable boxes, game consoles and others, are best supported using the OPTICAL or AUX 1 (RCA) inputs.Portable music players and PCs are best supported by using the AUX 2 (3.5 mm.) input.Bluetooth ConnectionBluetooth connectivity provides an easy, wireless connection for a personal audio device such as a tablet or mobilephone. The receiver has a range of approximately 10 meters. To pair your device, put the device into pairing mode. Pressthe BT-button on the remote control. Press “scan” on the device. Select the device “DABTA”. The blue LED indicator willilluminate on the speakers to show, pairing was successful.Wifi ConnectionThe Gida can be set up to the Wi-Fi from any PC or smart device. You only have to do this once and for the future, theGida will automatically link to the Wi-Fi. After unpacking the speakers, turn on your system. A voice will inform you, thatthe system starts in “Direct Connection Mode” and asks you to “Set up Wi-Fi”. Choose and link to the Gida speakersunder “Networks” on your device. Now, open your Explorer and go to the address “192.168.10.1”. This will direct you tothe Wi-Fi setup page for Gida. You can now choose and connect to the desired network. Your Gida is now connected tothe Wi-Fi!OBS:- If the Gida have difficulties in receiving signal, move the router closer.- The Gida will only connect to a 2,4 Ghz router and not to a 5.0 Ghz router.- Streaming to multiply rooms requires a third-party driver.7 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine