SF200 ManualSF200E-0160-01 REV 03Diane Smith4/15/13Page 15 of 274.5 You can now power up and use the SF-200.4.5.1 Verify that the SF-200 is powered on.(front LED will be green)No LED or red LED indicate insufficient power.4.5.2 Verify that the monitor has power and turned on.4.5.3 Wait for the Grey Scale image to be displayed.The image will also show what IP address the SF-200 isconnected to, and what resolution it is set to.5. Network Connection5.1 Network that is setup for DHCP (to automatically assign IPAddresses).5.1.1 The SF-200 default mode is DHCP enabled. So whenbooted up, the SF-200 should be assigned an IP addressfrom the Network and this IP Address will be displayed aspart of the Grey Scale image.