1USER INSTRUCTIONSNRS WHEELED COMMODEGeneral Safety WarningPlease make sure that you read and follow theseinstructions carefully. Failure to do so can result ininjury. Keep these instructions in a safe place forfuture reference.L22056 Wheeled Commode Fixed Height M66119 Wheeled Commode Height AdjustableN54411 Economy Wheeled Commode Fixed Height1.0 INTENDED USEThe Wheeled Commode range is designed for use as a commode or over a standard toilet. Subject to completion ofa suitable risk assessment it can be used for short transfers to move the user over the toilet. It features removablearms to enable side transfers.Figure 1: Model M661192.0 SAFETYAlways perform a risk assessment prior to use, includingsafe moving distance.Do not exceed the maximum user weight of the product,see table above for details.Do not use as an alternative to a wheelchair.Do not use in a shower or as a shower chair.Do not use the product outdoors. Only use on indoor levelsurfaces and take care over door thresholds.Always engage the brakes and swing away or lift off thefootrests when the user is transferring onto or off thecommode.Take care to ensure all body parts are inside the perimeterof the commode when passing through doorways.3.0 UNPACKINGRemove packaging and check all parts carefully. If anyparts appear damaged do not assemble and contact yoursupplier immediately. See Table 1 for contents list.4.0 ASSEMBLY INSTRUCTIONSPlease visit https://www.nrshealthcare.co.uk/bathroom-aids/toilet-aids/commodes/nrs-wheeled-commode-height-adjustable for an assembly demonstration.Part L22056N54411 M66119 QtyMain Chassis & Castors 1Main Chassis 1Seat Cover 1Detachable Arms 2Detachable Back 1Potty 1Footrest 2Adjustable-HeightCastors 4Hand Wheel 2E-Clip 4Table 1: Contents List4.1 M66119 ONLY1. Fit the adjustable height castors to the main chassisby sliding the tube inside the chassis frame, to thedesired height and secure using an ‘e-clip’.Note: The height should be set such that the userfeels comfortable but also allows for adequateclearance if being used over a toilet.2. Always ensure all four castors are set at equal height.4.2 ALL MODELS1. Attach the arms by slotting the tube inside the mainchassis frame on either side of the seat moulding.2. Attach the backrest by slotting the tube insidethe main chassis frame and secure in position byinserting and tightening the hand wheels.Maximum User Weights30st190kg25st160kgL22056 & N54411 M66119