1USER INSTRUCTIONS2 IN 1 BED RAIL Mk2M48192 2 in 1 Bed Rail Mk2General Safety WarningPlease make sure that you read and follow theseinstructions carefully. Keep these instructions ina safe place for future reference.Maximum User Weight25st160kgINTENDED USETo provide stable support to aid adult users (taller than 1.46 m) transfer in and out of bed, moving from alying to a sitting position as well as assist user repositioning. For use with solid base divan beds and framedbeds with fixed slats. Suitable for all bed sizes from single to king-size, it can also be fitted to super king-sizebeds with additional straps (refer to Accessories & Spares Parts).SAFETY318mmMinWARNING: To avoid possible entrapment, you mustalways position the product a minimum of 318 mmfrom the headboard or footboard.WARNING: To prevent additional entrapmenthazards, we recommend that you install the productat least 318 mm away from any adjacent bedsidefurniture. Where this is not possible, the prescribermust do a risk analysis.WARNING: The maximum user weight must not bemore than 160 kg (25 st).YOU MUST carry out a risk assessment to assessthe use and suitability of the bed rail in relation to theusers physical and cognitive ability, as well as thesurrounding environment.DO NOT install this product to a damaged bed.MAKE SURE there is no gap between the bed railand the mattress.ALWAYS use the bed securing straps providedwhen fitting to a divan bed.REGULARLY check the straps are tight and thedevice is stable and firmly fitted.DO NOT fit this product to profiling or medical beds.WE DO NOT recommend fitting this product tosprung divans or framed beds with non-fixed slats,unless a suitable risk assessment has been done.UNPACKINGRemove the packaging and check all parts carefully.Contact your supplier immediately if parts aremissing or damaged and do not try and assemble.2431Contents:1. Hand Rail x 12. Bed Rail Board x 13. Bed Straps x 24. E-Clips x 2