NRS Healthcare MOWBRAY M11089 User Instructions

NRS Healthcare MOWBRAY M11089 User Instructions Manual pdf 1 page image

1USER INSTRUCTIONSMOWBRAY TOILET SEAT & FRAME RANGEM11089 Mowbray Width Adjustable (Free Standing)M92739 Mowbray Toilet Seat & Frame 510 (Free Standing)General Safety WarningPlease make sure that you read and followthese instructions carefully. Keep theseinstructions in a safe place for future reference.Maximum User Weight30st190kg1. INTENDED USEThe Mowbray toilet frame and seat range is designed to assist those who have difficulty in lowering onto orrising from a standard toilet. The plastic moulded seat offers support in a natural position and the frame isheight and width* adjustable.(*Only available with M11089 – Mowbray width adjustable version).2. SPECIFICATION1. One piece moulded plastic seat.2. White epoxy coated frame.3. Non-slip ferrules (free standing versions)3. SAFETYWARNING: The maximum user weight must not bemore than 190Kg (30st).DO NOT: attempt to stand or climb on the product.MAKE SURE: all legs are set at equal height toavoid rocking.4. UNPACKINGRemove the packaging and check all parts carefully.Contact your supplier immediately if parts aremissing or damaged and do not try and assemble.5. FITTING INSTRUCTIONS1. Remove the moulded seat from its polythenebag and snap into place on the cross membersof the frame.2. Ensure the seat is firmly in place and secure atboth back and front.3. Adjust to the required height by removing each‘E’ clip in turn.4. Slide each leg up or down to the requiredheight. Align the holes in and replace ‘E’ clip.5. The back legs can be set at a slightly higherposition than the front to help with ease oftransfer. (Height difference should not be morethan 2 holes).6. Ensure that the two front legs are set at thesame height and the two back legs at the sameheight position in order to prevent rocking.7. Mowbray Width Adjustable only. (M11089). Toadjust the width, remove ‘E’ clip either side ofthe seat and slide tubes to obtain the desiredwidth (ensuring equivalent holes are used oneach side of the seat so that the frame remainssquare. Replace ‘E’ clips.8. Place the Mowbray over the toilet with thecutaway of the seat at the front and the integralsplash guard placed centrally over the toiletbowl.9. When not in use Mowbray’s can be stackedwith the seat in situ. It is recommended that nomore than five frames are stacked together forlong term storage.

/ 2

Related manuals for NRS Healthcare MOWBRAY M11089