1USER INSTRUCTIONSMOWBRAY TOILET SEAT & FRAME RANGEM11089 Mowbray Width Adjustable (Free Standing)M92739 Mowbray Toilet Seat & Frame 510 (Free Standing)General Safety WarningPlease make sure that you read and follow theseinstructions carefully. Keep these instructions in asafe place for future reference.Maximum User Weight30st190kg1. INTENDED USEThe height and width* adjustable Mowbray toilet frame and seat has been designed to assist those whohave difficulty in lowering onto or rising from a standard toilet. The comfortable plastic moulded seat offerssupport in a natural position. An optional floor fixing kit is also available (F11572).*M11089 – Mowbray width adjustable version only.2. SAFETYWARNING: The maximum user weight must not bemore than 190Kg (30st).DO NOT: Attempt to stand or climb on the product.MAKE SURE: All legs are set at equal height toavoid rocking.3. UNPACKINGRemove the packaging and check all parts carefully.Contact your supplier immediately if parts aremissing or damaged and do not try and assemble.3.1 ContentsItem M11089 M92739Toilet Seat 1 1Seat Frame Assembly n/a 1RH Frame Assembly 1 n/aLH Frame Assembly 1 n/aCrossbars 2 n/aLeg Extensions with Ferrules 4 4E-clips 8 44. ASSEMBLYThese products are supplied fully assembled apartfrom the seat.4.1 Fit the SeatRemove the seat from the bag and snap into placeon the centre bars of the frame.5. INSTALLATIONAdjust the height and width* for the toilet and userbefore installation.5.1 Adjust the Height - M11089 & M927391. Remove the 4 x leg extension E-clips.2. Slide the leg extensions to the required height,align the holes and replace the E-clips.3. Lift the toilet seat and lid.4. Place the Mowbray over the toilet with thecutaway of the seat at the front and the integralsplash guard placed centrally over the toiletbowl.Note: Make sure the seat and toilet frame are fullysecure before use.