Figure 1 – Model P11346General WarningPlease ensure these instructions are fully readand implemented. Failure to do so may result ininjury. Retain these instructions in a safe placefor future reference.1.0 MaintenanceIntended for use when sitting in either a chair,wheelchair or bed, these over bed tablesprovide an adjustable height flat surface forreading, eating, writing etc.2.0 SafetyDo not overload the table top, 20Kg Max load.Check hand wheel is secure at regular intervals.Before commencing height adjustment placeyour hand on the table top to prevent it rising tooquickly as the table-top lift is spring assisted.Do not attempt to use the table as a walking aid.3.0 UnpackingRemove packaging and check all parts carefullybefore assembling the product, figure 2. Do notassemble if any parts are missing or damaged.4.0 AssemblyPlease Note: An M8 or adjustable spanner anda cross head screwdriver are required toassemble this product.Frame Assembly: Push the fixed column (Item 3) into the squareboss on the base assembly (Item 2), figure 4. Secure in place, on the underside of the base,using the M8 bolt (Item 8) and washer (Item9), figures 5 & 6.A spanner is required for this operation.User InstructionsNRS Height Adjustable Table - RangeP11334 LIGHT BROWN P11346 WHITE P11358 DARK BROWN658971234Figure 3 – PartsFigure 2 – Parts ListPack Contents1 Table Top 6 M6 Screw X 22 Base Assembly 7 M6 Washer X 23 Fixed Column 8 M8 Bolt4 Adjustable Column 9 M8 Washer5 Hand WheelFigure 4 Figure 5 Figure 6