NRS Healthcare S13909 User Instructions

1USER INSTRUCTIONSEASYLIFT HOME - HEIGHT ADJUSTABLETILTING OVER-BED TABLES13909 Height Adjustable Tilting Over-Bed Table2. SAFETYWARNING: The central column is spring loaded.Make sure the central column hand-wheel is inposition & fully tightened before assembly/disassembly of the table.WARNING: Do not exceed the safe working load of25kg (4st).WARNING: Do not exceed the safe working load of thestorage tray 1kg.ALWAYS make sure that the table is correctlypositioned and adjusted to allow it to be used safely andcomfortably.DO NOT lean or sit on the table.DO NOT place hot objects directly on the table surface.Maximum heat resistance 65°C (149°F).MAKE SURE the area is clear before moving the table.MAKE SURE the tabletop is clear before tilting theangle.TAKE CARE when moving the table over rough oruneven surfaces. Lift the table over large ridges andwide gaps.ENTRAPMENT HAZARD: Do not use this productwithin 318 mm of headboard or other similar object.ENTRAPMENT HAZARD: Take care of fingers whenopening and closing the tabletops.ENTRAPMENT HAZARD: Always move the table to asafe location when the user is sleeping.3. UNPACKINGRemove the packaging and check all parts carefully.Contact your supplier immediately if parts are missing ordamaged and do not try and assemble.3.1 Contents:78101195641231. Table Top Assembly x 12. Column Assembly & Inner Rod x 1Note: Do not remove the PVC anti-rattle sleevesfrom either end of the inner rod.3. Central Column Hand-wheel x 14. Storage Tray x 15. Base Assembly x 16. Mushroom Feet x 47. M8 x 20mm Socket-Head Button-Screws x 48. M8 x 40mm Socket-Head Button-Screws x 49. Castors x 410. Allen Key x 111. Castor Spanner x 1General Safety WarningPlease make sure that you read and follow theseinstructions carefully. Keep these instructions in asafe place for future reference.Safe Working Load4st25kg1. INTENDED USEThe Easylift Home Over-Bed Table has been designed to provides users with a firm, flat / tilting surface that is suitablefor eating, writing, reading etc. The height can be easily adjusted from 710mm to 1090mm, and the main tabletop canbe tilted from 0° to 40° degrees. The single column construction and adjustable height makes this product suitable foruse with most divan beds, slatted beds, and height adjustable medical beds. A discrete storage tray has been cleverlyhidden under the folding side table.