NRS Healthcare P42809 User Instructions

NRS Healthcare P42809 User Instructions Manual pdf 1 page image

1USER INSTRUCTIONSFOLDING EASYFIT BED RAILGeneral Safety WarningPlease make sure that you read and follow theseinstructions carefully. Failure to do so can resultin injury. Keep these instructions in a safe placefor future reference.1.0 INTENDED USEThe Folding EasyFit Bed Rail gives the user stable support when getting in and out of bed and helps tomove from a laying to a sitting position. This product is suitable for all sized divan and slatted beds and canbe fitted to either side of the bed.P42809 Folding EasyFit Bed RailMaximum User Weight20st127kgFigure 1: Bed Rail (RHS Installation)2.0 SAFETYWarning: The bed rail handle must be positionedat least 320mm (12.5”) away from the headboard.Warning: Refer to Figure 1. The bed rail handlemust be angled away from the headboard.The maximum user weight must not be greater than20st / 127kg.The position of the bed rail should ideally be basedon a clinical assessment.The bed rail must always be positioned as close aspossible to the mattress, to prevent user entrapment.Do not fit this product to profile adjustable beds.Not suitable for use by children.3.0 UNPACKINGRemove the packaging and check all parts carefully.Contact your supplier immediately if parts aremissing or damaged and do not try and assemble.12345Figure 2: EasyFit Bed Rail Assembly3.1 ContentsNote: The Folding EasyFit Bed Rail is supplied pre-assembled in the folded position.1. Bed Rail Handle2. Bed Rail Base3. Plastic Wing-Nuts x 24. Plastic Saddle-Washers x 25. Steel Bolts x 24.0 ASSEMBLYRefer to Figure 2. The bed rail handle (1) can berotated in both directions, please make sure it is inthe correct position for your installation.1. Unscrew the two plastic wing-nuts (3), thenremove the two plastic saddle-washers (4) andthe two bolts (5).4.1 Right-Hand Side Assembly13452Figure 3: RHS Assembly

/ 2

Related manuals for NRS Healthcare P42809