34.4 Fix the Brake Cable:Figure 7: Attaching the Brake Cables1. Refer to Figure 7. Push the brake cable into theclips at the top of the main frame.4.5 Fitting the Bag:1 2 3Figure 8: Fitting the Bag1. Refer to Figure 8. Slot one of the ‘T-brackets’ onthe side of the bag into the slot at the top of themain frame.Note: The bag pockets must be positioned atthe rear of the rollator, facing the user.2. Repeat on the other side of the bag.3. Secure the bag with the safety strap.5.0 IN USE5.1 Operating the Brakes:The brakes must be checked before first use,failure to do so can result in injury.Apply BrakeLock ParkingBrakeUnlock ParkingBrake 321Figure 9: Operating the Brakes5.2 Apply the Brake:1. Refer to Figure 9. Squeeze the brake lever upto apply the brake. Let go of the lever to releasethe brake.Note: The brakes are operated independently.5.3 Locking the Parking Brakes:2. Refer to Figure 9. Push the brake lever downuntil it locks into position.5.4 Unlocking the Parking Brakes:3. Refer to Figure 9. Pull the brake lever up.An audible click will be heard as the brake isreleased.Note: To adjust the brakes, refer to Section 7.1.5.5 Folding the Rollator:1. Refer to section 4.5 and Figure 8. Release thebag security strap, then remove the bag by liftingit up with the handle. The ‘T-brackets’ shouldslide free from the bag slots on both sides.Note: If the bag is empty it does not need to beremoved prior to folding.23Figure 10: Folding the Rollator2. Refer to Figure 10. Gently, push the cross-barforwards to release the spring lock.3. Push the handles together to fold the rollator.6.0 CLEANING1. Make sure that all dirt and debris is removedfrom around the wheels, axle and brakes.2. To clean the bag wipe with a damp cloth. Do notmachine wash.3. Clean the frame regularly, using a generalpurpose, neutral detergent and warm water.4. Please check the suitability of the cleaningproducts before use. Do not use abrasivecleaners or cloths as these could permanentlydamage the surface and invalidate any warranty.5. Always allow the product to dry thoroughly priorto use or storage.