NRX NRX-5 User Manual
            | |
3NRX-3 - Display Feature PhoneNRX-5 - Display Feature Phone1. INSTALLATIONConnect the small plug (RJ-11) of the telephone line cord to the socket at theback of the unit and the other plug to the telephone socket at the wall.Connect the AC adaptor into a standard 220-240VAC mains socket and thepower socket at the back of the NRX-5.The New Call LED will light for about 1 second and the display will show0000--0000--0000. After about 4 seconds the display will show TTOOTTAALL::0000 NNEEWW::0000If you have subscribed to a Caller ID Service, the time and date will be auto-matically updated when the first call is received. Otherwise, it is necessary to setthe time and date manually, please refer to the Telephone Setup MenuIn case of power failure or accidental unplugging of the AC adaptor, the built-inEEPROM will retain all the telephone's memory including phone book and CIDrecords.1.1 Telephone Set-Up1.1.1 In standby mode, press the MENU button twice; the display will showSYSTEM.1.1.2 Using the SCROLL or buttons will switch between the varioussetting modes of the main System Menu loop as shown below:SET TIMESET RECALLLCD CONTRASTMESSAGEWAITINGTIME MODEAREA CODEPABX PrefixNZ CLID |
Related manuals for NRX NRX-5
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine