NTI SPLITMUX-DVI-4RT Installation And Operation Manual

Contents

NTI SPLITMUX-DVI-4RT Installation And Operation Manual Manual pdf 17 page image

SPLITMUX - Installation and Operation ManualINSTALLATION12CONNECTING VIDEO SOURCES / COMPUTERSSwitch off the computer and disconnect the keyboard, monitor and mouse.Connect keyboard and mouse ports of SPLITMUX to the computer ports either with a single USB cableor via the PS/2 interface (use the Y cable) up to 5 meters. For greater distances use a KVM or USB extender.To connect an analog video / computer source (VGA) to SPLITMUX, use a VGA-DVI cable. Digital videosources are connected via a DVI cable up to 20 meters. For greater distances use a DVI or VGA extender.CONNECTING USB DEVICESConnect a USB device to one of the four transparent USB ports to switch it to computers connected to SPLITMUX.SPLITMUX supports transparent USB devices such as printer, external memory, 3D mouse, and fingerprinter.POWERING UP THE SYSTEMSwitch on SPLITMUX with the power switch on the rear panel. All front panel LEDs light up brieflyindicating that SPLITMUX is ready for operation. SPLITMUX is now in Quad mode (default).Power up all connected computers. SPLITMUX recognizes all input video sources automatically anddisplays them on your monitor screen.To select another display mode, use the relevant keyboard commands (see page 86) or buttons on the frontpanel (page 6).INSTALLATIONConnectUSB deviceskeyboardMousekeyboard& mouseDigital oranalogPS/2 - Y cableORUSB cable (A-B)DVI-I -HD15 or DVI cable