NU Skin ecosphere 00001703 User Manual
                | |
8INITIAL RUNTouch the “Purified Water” button. The LED light will show orange.Turn on the water faucet.Let the water run through the water purifier until the water is clear toprepare the 3in1 cartridge for normal use. The LED light will change toblue once the water purifier is ready for use.note : Letting the water run until clear cleans the 3in1 cartridge and itstubing. Water will initially come out greyish-black or soapy. This is normal.USEThe faucet attachment has two outlets—one for tap water and theother for purified water.Tap waterPurified waterPURIFIED WATERTouch the “Purified Water” button. A blue LED light will indicateyour selection.Turn on the faucet to dispense purified water.precautions :• The water purifier will switch to tap water if water temperature is over 38˚Cto protect the life cycle of the 3in1 cartridge.• Water flow will reduce if the purifier is run in conjunction with lower watertemperature and pressure. If LED light shows orange, let the water runthrough the water purifier until the LED light changes to blue.• The device will automatically switch to tap water mode if the faucet isturned off for more than 10 seconds.TAP WATERstandby mode : Touch the “Tap Water” button to switch to tap water.You can alternate between tap water and purified water mode bypressing either button.When using “Tap Water” mode, water temperature is irrelevant.++ |
Related manuals for NU Skin ecosphere 00001703
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine