572. Click Management / Log System to find the event list of your unit.There are four kinds of event which will be listed on this page. Hardware Log: The log information of the operations to your unit, suchas reboot or shutdown. NVR Log: The log information of the NVR system, such as system,recording, user access information, POS and auto backup. NVR Event Log: The log information of the “Event & ActionManagement”, such as motion detection or camera connection lost. Backup and Export Log: The log information of the track of video dataexported and backup.The NVR Event Log will be recorded only if event is selected on Event & ActionManagement page. As for user access information, please go to Network Serviceto check Log Access box to enable this function.2.6.9 Save Unit ConfigurationSave configuration can let you save the settings of this unit. These settingscan be applied to other units, which will let you set other units more easily.1. Open Internet Explorer and log in to the unit.2. Click Management / Save / Load Configuration.3. Click the Save Configuration tab.
