1331. Define detection zone by dragging to draw a detection zone.2. Modify the sensitivity setting.3. Set the Interval.4. Check the Stop when found option. If unchecked, the search tool will listall the events it found, instead of stopping at the moment the event found.5. Click the Search button. Missing Object: Alarm is set on when the selected object is removedfrom the defined area on the screen.1. Define detection object by dragging to draw a detection zone.2. Modify the sensitivity setting.3. Set the Interval.4. Check the Stop when found option. If unchecked, the search tool will listall the events it found, instead of stopping at the moment the event found.5. Click the Search button. Focus Lost: System will inform you when the camera(s) lose its focus. Camera Occlusion: Alarms when the camera is blocked.7.1.5 Recorded Video Enhancement1. Open Internet Explorer and log in to the unit.2. Click the Playback button on the top of the page.3. Click the Open Record button.4. The Record Display Window will show the information of the availablevideo clips. Select the date you want to search the record from.5. Highlight the video clip you want to review, and then click the OK button.6. Click the Enhancement button.7. Check the General Setting. Apply active channel: The settings will only beapplied to the selected channel. Apply all channels: The settings will be applied tothose currently shown on the screen.8. Set the Filter Setting. Visibility: Check the option and adjust the gamma
