22ImmerVision and Vivotek (FE8171V). Generic Dewarp is a generalmethod, which done by software technique, and it’s suitable for mostfisheye cameras. You are not allowed to select type so far, type dependson camera model. Lens: Enable or disable lens function. Camera Position: Select the position of the camera.If users enable the lens while lens is not installed correctly or not even installed, awarning message will pop up as a notification if users are trying to operate lens onliveview page.2.1.6 Set up 2nd StreamStream profile is designed for mobile client and lower fps live stream display.Without stream profile integration, users cannot watch live video on mobileclient nor select lower fps stream on live view. Further, for performanceconsideration, we fix the resolution and frame rate for each brand/series.Refer to camera support list.1. Open Internet Explorer and log in to the unit.2. Click IP Camera / Camera Parameters.3. Click the 2nd Stream Settings tab. Stream Profile: Enable to watch live video on mobile client or selectlower fps stream on live view. (default: enabled) Low Profile: The stream profile, under 300kbps, is designed for mobileclient single-view. Minimum Profile: The stream profile, under 100 kbps, is designed for
