NXP Semiconductors FRDM665SPIEVB User Manual

Also see for FRDM665SPIEVB: User manual

NXP Semiconductors UM11734Hardware user manual for FRDM665SPIEVBIMPORTANT NOTICEFor engineering development or evaluation purposes onlyNXP provides the product under the following conditions:This evaluation kit is for use of ENGINEERING DEVELOPMENT OREVALUATION PURPOSES ONLY. It is provided as a sample IC pre-solderedto a printed-circuit board to make it easier to access inputs, outputs andsupply terminals. This evaluation board may be used with any developmentsystem or other source of I/O signals by connecting it to the host MCUcomputer board via off-the-shelf cables. This evaluation board is nota Reference Design and is not intended to represent a final designrecommendation for any particular application. Final device in an applicationheavily depends on proper printed-circuit board layout and heat sinkingdesign as well as attention to supply filtering, transient suppression, and I/Osignal quality.The product provided may not be complete in terms of required design,marketing, and or manufacturing related protective considerations, includingproduct safety measures typically found in the end device incorporating theproduct. Due to the open construction of the product, it is the responsibility ofthe user to take all appropriate precautions for electric discharge. In order tominimize risks associated with the customers’ applications, adequate designand operating safeguards must be provided by the customer to minimizeinherent or procedural hazards. For any safety concerns, contact NXP salesand technical support services.UM11734 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.User manual Rev. 1 — 18 May 20223 / 16