NXP Semiconductors Freescale MC13892 User Manual

MC13892 Evaluation Board Supports KIT13892VKEVBEJ and KIT13892VLEVBEJ, Rev. 4.03 Freescale SemiconductorImportant Notice2 Important NoticeFreescale provides the enclosed product(s) under the following conditions:This evaluation kit is intended for use of ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY. It isprovided as a sample IC pre-soldered to a printed circuit board to make it easier to access inputs, outputs, and supplyterminals. This EVB may be used with any development system or other source of I/O signals by simply connecting itto the host MCU or computer board via off-the-shelf cables. This EVB is not a Reference Design and is not intended torepresent a final design recommendation for any particular application. Final device in an application will be heavilydependent on proper printed circuit board layout and heat sinking design as well as attention to supply filtering, transientsuppression, and I/O signal quality.The goods provided may not be complete in terms of required design, marketing, and or manufacturing relatedprotective considerations, including product safety measures typically found in the end product incorporating the goods.Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions withregard to electrostatic discharge. In order to minimize risks associated with the customers applications, adequate designand operating safeguards must be provided by the customer to minimize inherent or procedural hazards. For any safetyconcerns, contact Freescale sales and technical support services.Should this evaluation kit not meet the specifications indicated in the kit, it may be returned within 30 days from the dateof delivery and will be replaced by a new kit.Freescale reserves the right to make changes without further notice to any products herein. Freescale makes nowarranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor doesFreescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaimsany and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and dovary in different applications and actual performance may vary over time. All operating parameters, including “Typical”,must be validated for each customer application by customer’s technical experts.Freescale does not convey any license under its patent rights nor the rights of others. Freescale products are notdesigned, intended, or authorized for use as components in systems intended for surgical implant into the body, or otherapplications intended to support or sustain life, or for any other application in which the failure of the Freescale productcould create a situation where personal injury or death may occur. Should the Buyer purchase or use Freescale productsfor any such unintended or unauthorized application, the Buyer shall indemnify and hold Freescale and its officers,employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, andreasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with suchunintended or unauthorized use, even if such claim alleges that Freescale was negligent regarding the design ormanufacture of the part.Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All otherproduct or service names are the property of their respective owners. © Freescale Semiconductor, Inc., 2011-2014. Allrights reserved.