SERVICE INFORMATIONTo obtain consistent performance over thelifetime of your NaceCare equipment, readthrough these instructions and save them forfuture reference.The model and serial number can be foundon the nameplate located on the side of thehandle. If you require service, or need tomake an inquiry about the machine, pleasehave this information ready when calling.IMPORTANT SAFETYINSTRUCTIONSWhen using an electrical appliance, basicprecautions should always be followed, includingthe following:Warning: Electric shockcan cause serious injuryor be fatal. Please readthe followinginstructions on the useand operation of thesemachines.Your floor machine is equipped with a safetyswitch lock and power switch triggersdesigned for your safety. Do not attempt tobypass or defeat the safety switch lock.Never use any device to lock the powerswitch in the “ON” position.Do not leave the floor machine when plugged in.Make sure that the machine unplugged when notin use, and before servicing or changing thebrushes or pads.Do not allow the machine to be used by a child.Close attention is necessary when used nearchildren. Do not leave the machine plugged inwhile unattended.Use only as described in this manual.Do not use the machine with a damaged cord orplug. If the machine is not operating as it should,discontinue use immediately and contact aservice center.When operating, pay close attention to thelocation of the electrical cord. Do not let thebrush/pad driver come into contact with theelectrical cord.Do not pull the cord around sharp corners oredges. Keep the cord away from heated surfaces.Connect to properly grounded outlet only.Do not use extension cords or outlets withinadequate current carrying capacity.Turn off all controls before unplugging.Do not unplug the machine by pulling on thecord.Do not handle the plug or floor machine with wethands.Use extra care when working near stairsDo not use with or near flammable orcombustible liquids or gasses.Use indoors onlyAlways keep your work area well lighted.