Nagra Nagra-VI Operating Instructions And Reference Manual

Contents

Nagra Nagra-VI Operating Instructions And Reference Manual Manual pdf 46 page image

Chapter III (Part 3 – The Copy function) July 201046The next function is available when the power to the Nagra VI was lost prior to finishing a copy. This is theonly function possible in this case.Retrieve Retrieve the uncompleted copy list items prior to power off. This functiondoes not clear the error. Press EXE again to display the copy function listdescribe above.Copy error messagesWhile a copy is running in the background, you may be alerted by the error message “Copy Error” on thebottom of the main display. This tells you that copy process has stopped and needs your intervention. Thecopy manager screen will give you an explanation of the reason for the error. Error messages are displayedas “Error: xxxxxxxx”: on the copy manager screen.MESSAGE DESCRIPTIONDisk full The destination disk for the copy is full.Card Full The CF card is full.File already exists The next index to be copied in the copy list already exists on thedestination disk.Power lost The copy was stopped due to a loss of power.Creating folder Unable to create the destination folder.Reading file Error reading source index / file.Writing file Error while writing destination index / file.Creating new file Unable to create destination index / file.Deleting file Unable to delete an index / file (overwrite mode).Copy set up error Destination for autocopy is the same as the working drive.If an error is displayed, go into the copy manager display screen and the reason behind the error will beindicated. Press the centre key and a selection of possible choices will be displayed:General error messagesCertain short messages may appear on the bottom of the main display when an incorrect command isexecuted. The message will explain the reason.Example: the message “Error: must be in stop” will be displayed if an attempt to change the samplingfrequency is made while the Pre-record is active in the TEST position.