Nakamichi Mobile Sound SystemEnglish16FM/AM ReceptionSource Selector buttonAuto Seek button/Manual Tuning buttonTuner Mode button/Band Selector button/Mono buttonPreset Station buttonPreset Scan button/Auto Memory buttonSourcePower OffMonoVolumeP.Scan/A.Me.Tune/SeekTrack/ClockLoud.FM/AMMuteSelectDisc1 Disc2 D.Scan3 T.Scan4 Random5 Repeat6CDCFMAMTrack ST RepeatRandomPSLoudMobile Receiver / CD Player CD-45zFM/AM receptionWhen the tuner mode is selected with the SourceSelector button or by pressing the Tuner Modebutton, the band indication (FM1, FM2, FM3, AM1,AM2) appears on the display for about 2 seconds,and FM/AM broadcast reception is carried out.When changing back to tuner mode from anothermode, broadcast reception continues with thesame station that was tuned in previously.Band selectionWith each push of the Band Selector button, thetuner band cycles through the settings FM1, FM2,FM3, AM1, AM2.Auto seekWhen the Auto seek button is depressed for about1 second or more, the unit automatically searchesfor the next strong station that can be received.- If no station is found on the first pass, the unitswitches to the higher-sensitivity DX mode (theindication "DX" appears on the display) and autoseek continues.Manual tuningPress the Manual Tuning button to activate manualtuning. This makes it possible to receive also weakstations where the automatic seek tuning functiondoes not stop.Manual memory1. Select the frequency band (FM1, FM2, FM3,AM1, AM2) with the Band Selector button andadjust the tuner to receive the desired broad-cast station.2. Keep the desired Preset Station button (1-6)depressed for about 2 seconds or more. Whenthe preset number on the display stops flash-ing and stays constantly lit, the station is storedin memory.Memory tuning1. Select the frequency band (FM1, FM2, FM3,AM1, AM2) with the Band Selector button.2. Press the desired Preset Station button (1-6).The station stored in that button is received.