Nanosat Nano lite User Manual
             | |
User's Manual 21TROUBLESHOOTINGTroubleshootingBefore contacting your local service center, please read the tips below carefully. If the problem persists aftercompleting the following procedure, please contact your local retrailer for further instructions.1. Nothing appears on the Front Panel or No power supply- Check that the power cable is plugged into the power socket.2. No Picture3. No Sound4. Remote Control Unit does not work5. "No Signal" on the screen6. Tuner detective check- Go to the Option and select System Information.7. You have forgotten your secret PIN code- You have forgotten your secret PIN code, The Default Pincode is 0000 and the Master Pincode is 2580.- Check the dish and adjust it.- Check the cable connection and correct it.- Get out of UHF mode.- Check channel and video output.- Check the volume level of the TV and receiver.- Check the mute status of TV and receiver.- Check the cable connection and correct.- Replace batteries.- Aim the remote control unit directly to the receiver.- Checking that nothing blocks the front panel.- Press STB once on RCU and try the remote again- Check the signal strength and the signal quality in the menu.- Check the LNB and replace the LNB if neccessary.- Check the LNB cable.- Check the dish and adjust it.This section may help you to use USB, etc.Select Utility in Main Page using ▲▼ and press OK.IV-1. System InformationIV-2. USBIV-1. System InformationThis option help you to know the current S/W andH/W version. Also provides you the product name.1. Select System Information in Options using ▲▼ andpress OK.2. Press EXIT to return to the previous menu.IV-2 USBThe receiver is equipped with host.1. Select USB in Utility with ▲▼ and press OK.2. If you want to change mode (S/W Upgrade, BootLoaderUpgrade), press RED button on the RCU.3. Select the file which you want to upgrade using ▲▼ andpress OK.4. After downloading the selected file, the receiver willreboot automatically.IV-3 Time Record1. If you "ENABLE" option set to YES, you can edit TIMERECORD function.MENU GUIDEIV.UtilityIV. UTILITYUser's Manual20 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine