Napoleon BGD36CFNTR Installation And Operating Instructions Manual

Also see for BGD36CFNTR: Installation and operating instructions Installation and operating instructions Installation and operating instructions Installation and operating instructions Installation and operating instructions

Contents

bgd36cf finishing

Napoleon BGD36CFNTR Installation And Operating Instructions Manual Manual pdf 3 page image

W45-0566 / A / 07..0631-32 bGD36CF FINISHINGLog PlacementDoor Operation32-33 bGD42CF FINISHINGLog PlacementGrate InstallationDoor Installation / Removal33-34 OPTIONAL bLOWER INSTALLATIONBGD6CF Accessing the BlowerBGD4CF Accessing the BlowerInstalling the Blower35 OPTIONAL FAN INSTALLATIONGD36 THERMOSTATIC SENSORCONTROL36-37 OPERATION / MAINTENANCEOperating InstructionsMaintenance37 ADJUSTMENTSPilot Burner AdjustmentVenturi Adjustment38-40 COMMON REPLACEMENTSbGD36CF REPLACEMENTSbGD42CF REPLACEMENTS41-42 TROUbLE SHOOTING GUIDE43 SERVICE HISTORY44 NOTESPG 4-6 INTRODUCTIONWarrantyGeneral InstructionsGeneral InformationCare of Glass & Plated PartsUnit Dimensions6-22 VENTINGVenting LengthsAir Terminal LocationsTypical Vent InstallationsSpecial Vent InstallationsVenting Application Flow ChartVenting SpecificationsBGD6CF Pre-Installation Preparation23-30 INSTALLATIONWall and Ceiling ProtectionUsing Flexible Vent ComponentsUsing Rigid Vent ComponentsRestricting Vertical Vents (BGD42CF ONLY)Gas InstallationMobile Home InstallationInstalling StandoffsFramingMantle Clearances and Enclosures31 COMMON FINISHINGGlowng EmbersCharcoal EmbersVermiculiteLogo PlacementWARNING• Do not burn wood or other materials in this fireplace.• The product is a vented gas fireplace• Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away toavoid burns or clothing ignition. Keep young children and animals away when the fireplace is hot.• Due to high temperatures, the fireplace should be located out of traffic and away from furniture and draperies.• Clothing or other flammable material should not be placed on or near the fireplace.• Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace.• It is imperative that the control compartments, burners and circulating blower and its passageway in the fireplaceand venting system are kept clean. The fireplace and its venting system should be inspected before use and at leastannually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting,bedding material, etc. The fireplace area must be kept clear and free from combustible materials, gasoline and otherflammable vapours and liquids.• Under no circumstances should this fireplace be modified.• This fireplace must not be connected to a chimney flue pipe serving a separate solid fuel burning appliance.• Do not use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect thefireplace and to replace any part of the control system and any gas control which has been under water.• Do not operate the fireplace with the glass door removed, cracked or broken. Replacement of the glass should be doneby a licensed or qualified service person.• Do not strike or slam shut the fireplace glass door.• This fireplace uses and requires a fast acting thermocouple. Replace only with a fast acting thermocouple supplied byWolf Steel Ltd.NOte: CHAnGES, OTHER THAn EDITORIAL, ARE DEnOTED By A VERTICAL LInE In THE MARGIn.PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCETAbLE OF CONTENTS