Napoleon BGD36CFNTR Installation And Operating Instructions Manual

Also see for BGD36CFNTR: Installation and operating instructions Installation and operating instructions Installation and operating instructions Installation and operating instructions Installation and operating instructions

Contents

Napoleon BGD36CFNTR Installation And Operating Instructions Manual Manual pdf 2 page image

2W415-0566 / E / 09.28.07VermiculiteLogo Placement32-33 BGD36CF FINISHINGLog PlacementDoor Operation33-34 BGD42CF FINISHINGLog PlacementGrate InstallationDoor Installation / Removal34-35 OPTIONAL BLOWER INSTALLATIONBGD36CF Accessing the BlowerBGD42CF Accessing the BlowerInstalling the Blower36 OPTIONAL FAN INSTALLATIONGD36 THERMOSTATIC SENSORCONTROL37-38 OPERATION / MAINTENANCEOperating InstructionsMaintenance38 ADJUSTMENTSPilot Burner AdjustmentVenturi Adjustment39-41 COMMON REPLACEMENTSBGD36CF REPLACEMENTSBGD42CF REPLACEMENTS42-43 TROUBLE SHOOTING GUIDE44 SERVICE HISTORYPG 4-5 INTRODUCTIONWarrantyGeneral InstructionsGeneral InformationCare of Glass & Plated PartsUnit Dimensions5-21 VENTINGVenting LengthsMinimum Air Terminal Location ClearancesTypical Minimum and Maximum Vent LengthsSpecial Vent InstallationsVenting Application Flow ChartVenting SpecificationsBGD36CF Pre-Installation Preparation22-31 INSTALLATIONWall and Ceiling ProtectionHorizontal InstallationAdjustable Firestop InstallationVertical InstallationUsing Flexible Vent ComponentsUsing Rigid Vent ComponentsRestricting Vertical Vents (BGD42CF ONLY)Gas InstallationMobile Home InstallationInstalling StandoffsFramingMinimum Mantle and Enclosure ClearancesClean Face Surround Kit Installation32 COMMON FINISHINGGlowng EmbersCharcoal EmbersWARNING• Do not burn wood or other materials in this fireplace.• The product is a vented gas fireplace• Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns orclothing ignition. Keep young children and animals away when the fireplace is hot.• Due to high temperatures, the fireplace should be located out of traffic and away from furniture and draperies.• Clothing or other flammable material should not be placed on or near the fireplace.• Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace.• It is imperative that the control compartments, burners and circulating blower and its passageway in the fireplace and venting systemare kept clean. The fireplace and its venting system should be inspected before use and at least annually by a qualified service person.More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. The fireplace area must be keptclear and free from combustible materials, gasoline and other flammable vapours and liquids.• Under no circumstances should this fireplace be modified.• This fireplace must not be connected to a chimney flue pipe serving a separate solid fuel burning appliance.• Do not use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect the fireplace andto replace any part of the control system and any gas control which has been under water.• Do not operate the fireplace with the glass door removed, cracked or broken. Replacement of the glass should be done by a licensedor qualified service person.• Do not strike or slam shut the fireplace glass door.• This fireplace uses and requires a fast acting thermocouple. Replace only with a fast acting thermocouple supplied by Wolf SteelLtd.• Pressure relief doors must be kept closed while the fireplace is operating to prevent exhaust fumes containingcarbon monoxide, from entering into the home. Temperatures of the exhaust escaping through these openings canalso cause the surrounding combustible materials to overheat and catch fire.NOTE: CHANGES, OTHER THAN EDITORIAL, ARE DENOTED BY A VERTICAL LINE IN THE MARGIN.PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCETABLE OF CONTENTS