Napoleon BGNV36N Installation And Operating Instructions Manual

Also see for BGNV36N: Installation and operation instructions Installation and operation instructions

Napoleon BGNV36N Installation And Operating Instructions Manual Manual pdf 16 page image

16W415-0275 / E / 07.13.106.4 GLOWING EMBERSRemove the backing of the logo supplied and place on the glass viewing door, asindicated.½"½"LOGO6.3 CHARCOAL EMBERS6.5 LOGO PLACEMENTTear the embers into pieces and place along the front row of ports covering all of the burner area in front ofthe small logs. Care should be taken to shred the embers into thin, small irregular pieces as only the exposededges of the fibre hairs will glow. The ember material will only glow when exposed to direct flame; how-ever, care should be taken to not block the burner ports.Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition. PHAZERTMlogs glow when exposed to direct flame. Use only certified "glowing embers" and PHAZERTM logs availablefrom your Continental® dealer.32.1Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.Fine dust found in the bottom of the bag should not be used.NOTE: Charcoal embers are not to be placed on the burner.6.6 LOUVRE INSTALLATIONABCSLOTA B CCLIPSCENTRE SLOTTABSLOTHINGE CLIP57.3UPPER LOUVRESInsert the louvre tabsinto the slots locatedat the top left and rightcorners of the unit.LOWER LOUVRESInsert the hinge clipsinto the slots located atthe bottom left and rightcorners of the unit. Toremove the louvres, pullthe back tabs of the clipsforward, while pushingthe louvre assemblyback. Lift the clip.HOODAttach the hood bypressing the top flangeinto the clips along thetop of the louvre open-ing. Secure using ascrew through the centreslot.