Napoleon GL18N Installation And Operating Instructions Manual

Also see for GL18N: Installation and operation instructions

Contents

9W415-0472 / D / 11.24.104.3 LOG PLACEMENTPhazer TM logs, exclusive to Napoleon Appliances, provide a unique and realistic glowing effect that is differentin every installation. Failure to follow these log placement instructions may cause sooting.A. Place the rear log #1 ontothe locating studs on therear log support.B. Position the holes on thebottom of log #2 onto thefibre embosses shown.C. Position the bottom cavityof log #3 onto the bracketlocated in the front rightcorner.D. Position the pins on thebottom of log #4 into theholes on the left end oflog #1 and the left end oflog #2.E. Place the end of log #5on the right end of log#1. The fork in the logshould straddle the knoton top of the log #2.Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colourpigments burn in during the heat activated curing process.Positioning the logs improperly will cause flame impingement and carboning.Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition. Use onlycertified PhazerTM logs available from your authorized dealer/distributor.! WARNINGFAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USEONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTYDAMAGE OR PERSONAL INJURY.LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THEPROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYEDIGNITION MAY OCCUR.THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.76.1A