Napoleon GVFL18N Installation And Operating Instrictions

Also see for GVFL18N: Installation and operation manual Installation and operating instructions Installation and operation instructions Installation and operating instructions

Contents

Napoleon GVFL18N Installation And Operating Instrictions Manual pdf 5 page image

5W415-0809 / 07.13.091.2 GENERAL INSTRUCTIONSThoroughly clean the chimney, flue and existing appliance before installing the new appliance into it. Do notburn solid fuels in any appliance that is equipped with this gas log set.The installation of this appliance must conform with local codes or in the absence of local codes, it must con-form to ANSI Z.223.1 or the CAN/CGA B149.Do not operate appliance in the presence of gasoline or other flammable liquids and vapours. Keep area clearof other combustible materials. The appliance and its shut off must be disconnected from the gas supply pipingsystem before any pressure testing of the system is done.Installation practices vary from region to region and it is important to know the specifics that apply to your area,For example: in Massachusetts State:• The appliance off valve must be a “T” handle gas cock.• The flexible connector must not be longer than 36 inches.• The appliance is not approved for installation in a bedroom or bathroom unless the appliance is adirect vent sealed combustion product.• Un-vented room appliance shall be installed in accordance with 527 CMR 30.00 and 248 CMR 3.00through 7.00.• Sellers of un-vented propane or natural gas-fired space/room appliances shall provide to each pur-chaser a copy of 527 CMR 30.00 upon the sale of the appliance fromhttp://www.napoleonfireplaces.com/Webshare/installation_manuals/mass_requirements.pdf• A carbon monoxide detector is required in all rooms containing gas fired appliances.ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RAN OUT,WITH THE GLASS DOOR OPENED OR REMOVED.PROVIDE ADEQUATE CLEARANCE FOR SERVICING AND OPERATING THE APPLIANCE.PROVIDE ADEQUATE VENTILATION.NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.OBJECTS PLACED IN FRONT OF THE APPLIANCE MUST BE KEPT A MINIMUM OF 48” FROM THEFRONT FACE OF THE UNIT.FIRE RISK. EXPLOSION HAZARD.HIGH PRESSURE WILL DAMAGE VALVE. DISCONNECT GAS SUPPLY PIPING BEFORE PRESSURE TESTINGGAS LINE AT TEST PRESSURES ABOVE 1/2 PSIG. CLOSE THE MANUAL SHUT-OFF VALVE BEFOREPRESSURE TESTING GAS LINE AT TEST PRESSURES EQUAL TO OR LESS THAN 1/2 PSIG.USE ONLY WOLF STEEL APPROVED OPTIONAL ACCESSORIES AND REPLACEMENT PARTS WITH THIS APPLIANCE.USING NON-LISTED ACCESSORIES (BLOWERS, DOORS, LOUVRES, TRIMS, GAS COMPONENTS, VENTINGCOMPONENTS, ETC.) COULD RESULT IN A SAFETY HAZARD AND WILL VOID THE WARRANTY AND CERTIFICATION.! WARNING