Napoleon Gas Grill Assembly Instructions Manual

Contents

Napoleon Gas Grill Assembly Instructions Manual Manual pdf 4 page image

4TOOLS REQUIREDCheck for missing or damaged parts before you begin and consult your local retailer if neccessary.3/83/8 WRENCHOR NUTDRIVERADJUSTABLEWRENCHPHILIPSSCREWDRIVERHAMMERGAS AND ELECTRICAL PIPINGThe piping up to the gas grill is the responsibility of the installer and piping should be located as shown in thebuilt-in instructions. Do not use hose to connect the unit. It must be connected with either rigid pipe, copper tube or anapproved flexible metal connector. The installation must comply with CAN B149.1 Natural Gas and Propane installa-tion code in Canada, or to the National Fuel Gas code, ANSI Z223.1 in the United States. The minimum recommendedpiping size is NPS 1/2" for rigid pipe, and 1/2" OD for copper tubing (based on a 20 ft run). Longer runs may requirelarger sizes to conform with CAN B149.1. Propane Gas Installation Code in Canada or to the National Fuel Gas Code,ANSI Z223.1 in the United States. Look to the manual that came with the gasgrill for further instructions.To ease installation and piping, removable knockouts havebeen provided in the side panels and in the center of eachbackpanel. The knockouts in the side panels should be removedbefore the cabinets are bolted in a row. Only remove the knock-outs that are required for the piping of any gas, plumbing orelectrical lines.KNOCKOUTS