Napoleon HD81 Installation And Operating Instructions Manual

Also see for B81NS: Installation and operating instructions Installation and operating instructions

Contents

Napoleon HD81 Installation And Operating Instructions Manual Manual pdf 25 page image

5W415-0712 / A / 11.09.10C. Align the 4 tabs on the porcelain base 2down to line up with the holes in the burnertray. Secure using the screws provided.BendTabsPilotAssembly274.1Evenly spread the glass media onto the media tray, covering the burner tube and following the natural shape ofthe tray.NOTE: The distribution of glass media over the burner tube will influence the fl ame height. When thefl ames impinge on the glass, the glass may discolour slightly and the edges may soften.CLEANING GLASS MEDIAGlass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with milddish soap, drain, rinse thoroughly and dry before placing over the burner.CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURETHAT IT IS DRY.DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IFREPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZEDDEALER / DISTRIBUTOR.GLASS MEDIA OVER THE BURNER MUST NOT BE MORE THAN ONE LAYER HIGH. MORE THAN ONE LAYEROVER THE BURNER WILL CAUSE FLAME LIFTING AND SOOTING PROBLEMS.! WARNING2.6 GLASS MEDIA

/ 28

Related manuals for Napoleon B81NS