Napoleon HD81 Installation And Operation Instructions Manual

Also see for HD81: Installation and operating instructions Installation and operation instructions Installation and operating instructions Installation and operating instructions Installation and operating instructions

Contents

Napoleon HD81 Installation And Operation Instructions Manual Manual pdf 3 page image

3W415-0712 / 11.25.082.3 BuLkhEAdSNOTE: Bulkhead covers need to be removed.2.3.1 Connect the gas flex lines and the pilot line tothe gas bulkheads located under the valveaccess opening. Be sure to match up the gasmanifold marked with a green dot with thecenter bulkhead, also marked with a greendot. care must be taken to ensure the pilotline isn’t damaged and ensuring gas tightconnections are made.2.3.2 connect the pilot electrode leads to thebulkhead. The leads can only fit one way. Youneed to match the 1/4” flag with the 1/4”bulkhead spade and the 3/16” flag with the3/16” spade.gasBulkheadsgreendotspilotBulkheadpilotelectrodeleadspilotelectrodeFIGURE 2.3.1FIGURE 2.3.22.3.3 ensure the 2 venturi tubes are over theorifices before lighting.2.3.4 check for gas leaks by brushing on a soapand water solution. Do not use open flame.2.3.5 After leak test has been performed re-installaccess panel with gasket.venturitubeOrificeFIGURE 2.3.3