Napoleon HIGH COUNTRY NZ5000 Installation Manual

Also see for High Country NZ5000: Installation manual Owner's manual Installation manual

Contents

Napoleon HIGH COUNTRY NZ5000 Installation Manual Manual pdf 6 page image

W415-1720 / C / 10.27.17EN6general information3214OPENCLOSEDOPEN2.0 general informationIt is recommended to test the listedcomponents below before installation:• Doors• Balance weights• Outside air damper• Flue damperAll components should be in good operatingcondition before the appliance is installed.! WARNING• Before installing this appliance, contact the local building or fire authority and follow their guidelines.• This appliance must be installed by a qualified installer. Follow the installation directions. Do not operatewithout fully assembling all components.• If this appliance is not properly installed, a house fire may result.• Do not expose the appliance to the elements (ex. rain, etc.) and keep the appliance dry at all times. Wetinsulation will produce an odour when the appliance is used.• This appliance is hot when operated and can cause severe burns if contacted. Children and pets must bekept from touching the appliance when it is hot. Contact your local authorized dealer/distributor for safetyscreens that may be available for this product.• Combustible material such as firewood, wet clothing, etc. placed too close can catch fire. Objects placedin front of the appliance must be kept a minimum of 48” (121.9cm) from the front of the appliance.• All wiring should be done by a qualified electrician and shall be in compliance with local codes and withthe National Electric Code ANSI/NF NO. 70-Current (in the United States), or with the current CSA C22.1Canadian Electric Code (in Canada).• This appliance and its components are designed to be installed and operated as a system. Any alterationto or substitution for items in this system, unless allowed by these installation instructions, will void theONMI listing and may void the product warranty. It may also create a hazardous installation. Read throughthese instructions thoroughly before starting your installation and follow them carefully throughout yourproject.The location of windows, doors and thetraffic flow in the room where the applianceis to be located should be considered. Ifpossible, you should choose a locationwhere the chimney will pass through thehouse without cutting a floor or roof joist.2.1 general instructionsnote:1. Combustion air is brought into theappliance through the slots and aroundthe glass door or through the screen.2. An outside air damper regulates theamount of outside air introduced to theappliance to supplement indoor air andcan only be adjusted to either a fullyclosed or fully open position.3. Inside the firebox, combustion takesplace and exhausts out the chimney.4. The appliance includes a flue damperat the base of the chimney which shallbe closed when the appliance is notin use to prevent cold air entering thehome, see “flue damper operation”section.