Napoleon High Country 7000 Installation And Operation Manual

Also see for High Country 7000: Quick start guide

Napoleon High Country 7000 Installation And Operation Manual Manual pdf 19 page image

ENW415-1676 / C / 07.23.1819installation4.3 adding chimney sectionsAdd chimney sections, according to the manufacturer’s installation instructions. If the chimney system passesthrough an attic space, a rafter radiation shield or attic insulation shield is required. The chimney must extend atleast 3ft (0.9m) above its point of contact with the roof and at least 2ft (0.6m) higher than any wall, roof or buildingwithin 10ft (3.1m). If the chimney extends more than 5ft (1.5m) above the roof, it must be secured using a roofbrace or guide wires. A raincap must be installed to avoid internal damage and corrosion.3 FT (1m)MIN3 FT (1m)MIN10 FT (3m)OR MOREFLAT ROOF WALLRIDGELESS THAN10FT (3m)2 FT (0.6m) MIN3 FT (1m)MIN2 FT (0.6m)MINLESS THAN10FT (3m)3 FT (1m)MIN2 FT (0.6m)MIN10 FT (3m)TO NEARESTROOFLINE39.2Floor, Ceiling JoistLIVING SPACEFramedEnclosure2” (51mm)clearance fromchimney tocombustible wallChimney LengthsCeiling JoistChimney must betotally enclosedwhen passingthrough living spacewith a minimum 2”(51mm) clearanceto combustibles.ATTIC SPACEnote:This illustration is for wood appliances only.