6LIGHTING INSTRUCTIONSLIGHTING PORTHOLE(BOTH SIDES) LEFTBURNERPAIRRIGHTBURNERPAIROpen lid.Ensuring burner controls are inthe off position, turn on the gassupply valve.Do not use back burner while operating any of the main burners.The propane cylinder is equipped with an excess flow device. Unless all burners areturned off prior to turning the cylinder on, only small flames will be achievable.IGNITER REARBURNERBack Burner Lighting Main Burner Lighting Side Burner Lighting(optional)Remove warmingrack.Press and hold igniterbutton until lit, or lightby match.Turn the left burner ofeither burner pair to high.Open burner cover.Press and hold igniterbutton until burner lights, orlight by inserting a lit matchthrough the correspondingside lighting port.Turn side burnercontrol to highposition.Turn back burnercontrol to high position.If ignition is not immedi-ate, turn the burner controloff. Wait 5 minutes.Turn igniter knobclockwise severaltimes, or light bymatch.If ignition is not immedi-ate, turn the burner controloff. Wait 5 minutes.With the left burneroperating on high, turn theright burner of the samepair to high.If ignition is notimmediate, turn theburner control off.Wait 5 minutes.To light the otherburner pair, repeat theprocedure.