Napoleon Torch GT8N Installation And Operating Instructions Manual

Also see for TORCH GT8N: Installation and operating instructions Installation and operation instructions Installation and operation instructions Installation and operation instructions Installation and operating instructions

Napoleon Torch GT8N Installation And Operating Instructions Manual Manual pdf 19 page image

19W415-0794 / A / 06.08.10Minimum clearance to combustible construction from appliance and vent surfaces:Appliance framing: - 6” to top- 0” to stand-offs(Rear and sides)Vent pipe*: - 2” top- 1” sides and bottomRecessed depth: - 7”WITHOUT FRAME INSTALLED WITH FRAME INSTALLED5.1 MINIMUM CLEARANCE TO COMBUSTIBLES2” MIN.*12” MIN. TOCOMBUSTIBLES(to ceiling or mantle)1 1/2” MIN.* Any protrudingfinishing materialinstalled in this space(ie. baseboards) mustleave 2” ofunobstructed clearanceto allow for full rotationof the control door.COMBUSTIBLE NON-COMBUSTIBLE2”1”0” IFNON-COMBUSTIBLEFINISHING IS USEDSUCH AS BRICK ANDSTONE.BRICK6” MIN.FRAMECONTROLDOOR (OPENPOSITION)* HORIZONTAL VENT SECTIONS: A minimum clearance of 1” at the bottom and sides and 2” at the top of thevent pipe in all horizontal runs to combustibles is required. Use firestop spacer W010-1961 (supplied).* VERTICAL VENT SECTIONS: A minimum of 1” all around the vent pipe on all vertical runs to combustiblesis required. Use firestop spacer W500-0358 (not supplied).