Napoleon fireplaces Installation And Operation Instructions Manual

Contents

trouble shooting guide

Napoleon fireplaces Installation And Operation Instructions Manual Manual pdf 2 page image

2W415-0319 / E / 01.17.07HoodLouvre BracketHinge ScreenLouvre Installation & RemovalHeat Shield Stand Off RemovalLogo Placement16-17 OPTIONSPatented Catalytic Glass DoorBlower Installation18-19 OPERATION / MAINTENANCEOperating InstructionsMaintenanceCatalytic Tile MaintenanceOxygen Depletion Sensor Pilot CleaningPilot Flame AppearanceVenturi Adjustment20-21 REPLACEMENTSOrdering Replacement PartsReplacement Parts22-23 TROUBLE SHOOTING GUIDEPG 3-4 INTRODUCTIONWarrantyGeneral InstructionsGeneral InformationCare of Glass Doors, Catalytic Tiles& Plated Parts5-12 INSTALLATIONCombustion and Ventilation Air ProvisionsDetermining Confined or Unconfined SpaceGas InstallationFraming DimensionsPeninsula Installation ProcedureOpen End Installation ProcedureSee-Thru Installation ProcedureIsland Installation Procedure13-15 FINISHINGLog PlacementGlowing EmbersCharcoal EmbersMantle InstallationCurtain MeshWARNING• Under no circumstances should this heater be modified.• Provide adequate ventilation and combustion air. Provide adequate accessibility clearance forservicing and operating the heater. Never obstruct the front opening of the heater.• If heater shuts off, do not re-light until you provide fresh air. If heater keeps shutting off, have itserviced. Keep burner and control compartment clean.• Do not burn wood or other materials in this heater.• Adults and especially children should be alerted to the hazards of high surface temperatures andshould stay away to avoid burns or clothing ignition. Keep young children and animals awaywhen the fireplace is hot.• Due to high temperatures, the heater should be located out of traffic and away from furniture anddraperies.• Clothing or other flammable material should not be placed on or near the heater.• Any safety screen or guard removed for servicing must be replaced prior to operating the heater.• It is imperative that the control compartments, burners and circulating air passageways in theheater are kept clean. The heater should be inspected before use and at least annually by aqualified service person. More frequent cleaning may be required due to excessive lint fromcarpeting, bedding material, etc. The heater area must be kept clear and free from combustiblematerials, gasoline and other flammable vapours and liquids.• Furniture or other objects must be kept a minimum of 4 feet away from the front of the fireplace.• Do not use this heater if any part has been under water. Immediately call a qualified servicetechnician to inspect the heater and to replace any part of the control system and any gas con-trol which has been under water.• Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner flamepatterns.• Do not use a blower insert, heat exchanger insert or other accessory not approved for use withthis heater.ANY CHANGE TO THIS HEATER OR ITS CONTROLS CAN BE DANGEROUS AND IS PROHIBITED.NOTE: CHANGES, OTHER THAN EDITORIAL, ARE DENOTED BY A VERTICAL LINE IN THE MARGINTABLE of CONTENTSPLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE