National Cycle Fly Boy N27410 Quick Start Manual

National Cycle Fly Boy N27410 Quick Start Manual Manual pdf 1 page image

National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA708-343-0400 / Fax 708-343-0625 / www.nationalcycle.com / info@nationalcycle.com©2020 National Cycle, Inc. Page 1 of 2 10-110082-000 03/20Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing thiswindshield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.Quantum® Hardcoated PolycarbonateCustom Replacement Screens for:2014-Current FLHT/FLHX ModelsN27410 Fly Boy™ Windscreen; Dark TintN27420 Bad Boy™ Windscreen; Dark TintN27430 Gee Bee™ Windscreen; Dark TintCONTENTS OF KITITEM DESCRIPTION QTY.(1) Custom Windscreen 1TOOLS REQUIREDT-27 Torx WrenchALL OEM FASTENERSWILL BE REUSED.PREPARATION1. Place motorcycle securely on its sidestand.2. Protect the fender and fairing from damage that may becaused by dropped hardware or tools.INSTALLATION1. Using a T-27 Torx wrench, loosen and remove the two outsideOEM windscreen screws (B). Then loosen – but do notremove – the center OEM windscreen screw (A).2. Remove the OEM windscreen by gently pulling it forward andthen straight up.3. Install your new Custom WIndscreen (1) in the reverse order.4. Now securely tighten – but not over-tighten – all three screws.Make sure the two outside screws (B) are correctly thread-ed and not crossthreaded into the OEM retaining Wellnuts.That’s all there is to it. Enjoy the ride!

/ 2

Related manuals for National Cycle Bad Boy N27420