National Electronics & Watch M11-1913D User Manual
            | |
National Electronics & Watch Co,. Ltd.BC106.3) Using HRM mode:RUN mode and HRM mode has the same timer counter. When the chronograph is started orstopped in RUN mode, the same thing happens in HRM mode. They just differ in the views.This mode is dedicated to HRM views6.3.1) Press S5 or S7 from Time to HRM mode.6.3.2) Press S1 to START or RESTART while press S5 to TAKE LAP. If auto lapfunction is set, the watch will take lap automatically based on auto lap setting.There is also a beep sound during taking auto lap.6.3.3) Press S1 to stop after completing your run.6.3.4) Press and hold S1 or press S11 to save your run data.Step 6) Download your data to PC:The watch comes with PC software to make communication between your watch and PC easyand enjoyable. Please install the PC software to your PC using the installer provided. Thewatch is using a USB PC link cable to connect the watch to PC.Run the GPS PC software on your PC. Plug the USB cable with the watch clamped in theother end of the cable. PC software will then prompt you to download the data. Click thedownload button to begin downloading. The PC software will prompt to delete the data in thewatch. User has the option to delete the data in the watch or not.The PC software installation and instruction guide can be found at the end of this manual.Please take time to read the guide.General OperationsThe watch has the following main modes: Time, Run, Chronograph, HRM, Run Data, Timer,Alarm and Set modes. Press S7 to scroll through these modes.Note: While in Time mode, User has an option to use a short cut key, press S1 to go to RUNmode while press S5 to go to ALTI mode.Watch reset:The user can reset the watch by pressing and holding S1, S5, S7 and S11 together. Allsegments will be light on, then EL backlight ON. The software code will be displayed. Thewatch will be reset. Below are the reset views.EL backlight:This watch has a Night mode function. Following are the options in SET mode and theirfunctions:10 SECONDS – Press S11 will turn ON the Light for 10 seconds.20 SECONDS – Press S11 will turn ON the Light for 20 seconds.NIGHT ON – Light will continuously ON when CHRONO is running from 6:00 pm to 7:00 am.TIME modePress S7 from SET mode to TIME mode. There are 2 views in time mode. Press and hold S3to toggle T1 and T2 views. Following are the views with the corresponding informationdisplayed:View 1 Æ Time 1, Week day, Month, Date, Battery level indicator and GPS relative signalstrength (if Satellite is received).View 2 Æ Time 2, Week day, Month, Date, Battery level indicator and GPS relative signalstrength (if Satellite is received). |
Related manuals for National Electronics & Watch M11-1913D
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine