NI 1483R User Guide and Specifications 16 ni.comStorage EnvironmentAmbient temperature range ...................................–20 °C to 70 °CTested in accordance with IEC-60068-2-1and IEC-60068-2-2Relative humidity range .........................................5% to 95%, noncondensing,Tested in accordance with IEC-60068-2-56Note Clean the device with a soft, non-metallic brush. Make sure the device is completely dry andfree from contaminants before returning it to service.Shock and VibrationOperational shock ..................................................30 g peak, half-sine, 11 ms pulseTested in accordance with IEC-60068-2-27.Test profile developed in accordance withMIL-PRF-28800F.Random vibrationOperating .......................................................5 to 500 Hz, 0.3 grmsNonoperating .................................................5 to 500 Hz, 2.4 grmsTested in accordance with IEC-60068-2-64.Nonoperating test profile exceeds the requirementsof MIL-PRF-28800F, Class 3.SafetyThis product meets the requirements of the following standards of safety for electrical equipment formeasurement, control, and laboratory use:• IEC 61010-1, EN 61010-1• UL 61010-1, CSA 61010-1Note For UL and other safety certifications, refer to the product label or the Online ProductCertification section.Electromagnetic CompatibilityThis product meets the requirements of the following EMC standards for electrical equipment formeasurement, control, and laboratory use:• EN 61326 (IEC 61326): Class A emissions; Basic immunity• EN 55011 (CISPR 11): Group 1, Class A emissions• AS/NZS CISPR 11: Group 1, Class A emissions• FCC 47 CFR Part 15B: Class A emissions• ICES-001: Class A emissionsNote For the standards applied to assess the EMC of this product, refer to the Online ProductCertification section.Note For EMC compliance, operate this device with shielded cables and according to thedocumentation.