National Instruments FIELDPOINT cFP-DO-403 Operating Instructions Manual

Also see for FIELDPOINT FP-DO-403: Operating instructions

Contents

National Instruments FIELDPOINT cFP-DO-403 Operating Instructions Manual Manual pdf 13 page image

© National Instruments Corp. 13 [c]FP-DO-403contains the environmental regulations and directives with whichNI complies, as well as other environmental information notincluded in this document.Waste Electrical and Electronic Equipment (WEEE)EU Customers At the end of their life cycle, all productsmust be sent to a WEEE recycling center. For moreinformation about WEEE recycling centers andNational Instruments WEEE initiatives, visit ni.com/environment/weee.htm.Mechanical DimensionsFigure 6 shows the mechanical dimensions of the FP-DO-403installed on a terminal base. Dimensions are given in millimeters[inches]. If you are using the cFP-DO-403, refer to the CompactFieldPoint controller user manual for the dimensions and cablingclearance requirements of the Compact FieldPoint system.Figure 6. FP-DO-403 Mechanical Dimensionsֵ⬉ᄤ ᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ ˄Ё೑ RoHS˅Ё೑ᅶ᠋ National Instruments ヺড়Ё೑⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ (RoHS)Ѣ݇ǄNational Instruments Ё೑ RoHS ড়㾘ᗻֵᙃˈ䇋ⱏᔩni.com/environment/rohs_chinaǄ (For informationabout China RoHS compliance, go to ni.com/environment/rohs_china.)109.5[4.31]91.44[3.60]107.19[4.22]

/ 15

Related manuals for National Instruments FIELDPOINT FP-DO-403