Chapter 2 Installation and Configuration©National Instruments Corporation2-9FieldPoint FP-1000/FP-1001 User ManualFigure 2-11. Typical Signal Connections for Host Computer Connected to MultipleFP-1001 Network ModulesConfiguring the Network ModuleFigure 2-12 shows the 8-position switch on the FP-1000 and FP-1001FieldPoint network modules. Switches 1-5 set the network address, andswitches 6-8 set the baud rate.Figure 2-12. Address and Baud Rate Switch120Ω120Ω120Ω120ΩFrom HostComputer's RS-485Transmit Output Pair (TX)To HostComputer's RS-485Receive Input Pair (RX)FP-1001 FP-1001 FP-1001++––RX TX RX TX RX TXConnect the TX outputs of the host computer to the RX inputs of the FP-1001,and the RX inputs of the host computer to the TX outputs of the FP-1001.1 2 3 4 5 6 7 81 2 3 4 5 6 7 8AddressBaudRateSwitch Cover(Removed)
