National Instruments NI 4350 User Manual

Also see for NI 4350: User manual

Contents

National Instruments NI 4350 User Manual Manual pdf 42 page image

Chapter 3 NI 4350 Operation©National Instruments Corporation3-21NI 4350 User ManualFigure 3-9. Thermistor MeasurementSee Figure 3-10 for an example of how you can use differenttransducers connected to analog channels in the same measurementsetup.Connecting Your ResistorYou can use signal connection techniques, described in the sections,Connecting Your RTD and Connecting Your Thermistor, for any resistoras well.The NI 4350 accessories—the CB-27T and CB-27 for the NI 4350(PCMCIA), and the TBX-68T and TBX-68 for the NI 4350 (ISA) andthe NI 4350 (USB)—are designed to be used with RTDs, thermistors,and resistors. Consult your accessory installation guide for instructionson how to connect your resistors. Figure 3-10 shows an example of howto use different transducers connected to analog channels in the samemeasurement setup.IEX+RtCH+CH–IEX–